Spotless Wheels & Paint – Iron Powder Remover 350ml

Protect your vehicle’s finish from the silent damage of industrial fallout. The TUBEER Iron Powder Remover is a high-performance, pH-balanced solution designed to dissolve stubborn iron particles, brake dust, and rail dust that embed themselves into your car or bike's paint and wheels. Unlike standard cleaners, this spray chemically reacts with iron contaminants to lift them safely from the surface, preventing long-term corrosion and "orange speck" oxidation.

Key Specifications:

• Volume: 350ml
  
  
• Compatibility: Safe for all painted surfaces, chrome, and wheel hubs
  
  
• Formula: Eco-friendly, non-acidic, and pH-balanced
  
  
• Action: Fast-acting dissolution with a built-in protective waxy film
  
  
• Application: Spray-on, Rinse-off (No scrubbing required for light fallout)

Key Technical Features

Advanced Paint-Safe Decontamination Industrial iron dust is often invisible but feels like "sandpaper" on your paintwork. TUBEER is engineered with a high level of safe, non-corrosive ingredients that target only the iron particles. It effectively removes contaminants from your car body and wheel hubs without causing side effects to your clear coat, wax, or ceramic coatings.

Prevents Surface Erosion & Pitting Iron particles that sit on your paint will eventually oxidize and "pit" the surface, leading to permanent damage. By chemically neutralizing these particles, this spray prevents iron erosion, saving you significant money on professional paint correction and restoration in the future.

Dual-Action Clean & Protect This is more than just a cleaner. While removing rust stains and iron dust, TUBEER leaves behind a micro-thin, waxy protective film. This waxy barrier adheres to the metal or paint for months, providing a hydrophobic shield that helps prevent future iron accumulation and rust from re-forming.

Rapid "Bleeding" Action The fast-acting formula begins working immediately upon contact. You will see the spray turn a purple/red color as it reacts with the iron, indicating that the contaminants are being dissolved and held in suspension, ready to be rinsed away.

Usage and Maintenance Instructions

1. Preparation: Rinse the vehicle with water to remove loose dirt and debris. Ensure the surface is cool to the touch and out of direct sunlight.
   
   
2. Application: Spray TUBEER directly onto the affected paintwork or wheels.
   
   
3. The Wait: Allow the product to sit for 2–3 minutes. You will notice the liquid turning purple as it reacts with iron particles. Do not let the product dry on the surface.
   
   
4. Rinse: Thoroughly rinse the area with a strong stream of water.
   
   
5. Final Step: Dry the vehicle with a microfiber towel to enjoy a smooth, contaminant-free finish.